For screen reader problems with this website, please call888-238-30008 8 8 2 3 8 3 0 0 0Standard carrier rates apply to texts.

JVC KS-DR2004D Black 4 Channel Compact Marine Amplifier

Model #: KS-DR2004D
974904
JVC
At a Glance
A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection.
$249.95Save $NaN
$249.95

Get to know this product.

IP67/IP66 Waterproof & Dustproof

IPX6: Protection against Powerful Water Jets / Water projected in powerful jets, up to 12.5mm (0.49 inch) against the amplifier from any direction shall have no harmful effects. IPX7: Protection against Immersion, up to 1 m (3 feet, 3 inch) depth / Restricts harmful amounts of water entry when the amplifier is immersed in water under defined conditions of pressure and time, up to 1 m (3 feet, 3 inches) of submersion. IP6X: Effective against Dust-tight / Dust entry is restricted to avoid damage to the amplifier. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection.

ASTM B117 Rustproof

Saltspray-proof: ASTM B117 salt spray (or salt fog) corrosion test simulates harsh conditions in a saltwater environment to ensure the amplifier does not corrode or fail in these harsh conditions. By adopting the Corrosion-Resistant Sealed Cast Aluminum Chassis and stainless-steel screws resistant to rust and corrosion, this amplifier achieves the highest level of durability in its class.

Vibration-proof

Vibration-proof: Vibration can be damaging to amplifier if it is not designed to withstand it. This amplifier passes a 3-axis multi-frequency vibration test. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate.

Increased Power Flow

Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output.

High Quality Capacitors

High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound.

Magnetic Shielding

Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound

Speaker Level Input

If your receiver does not have RCA audio outputs, simply connect your speaker wires to to the KS-DR2004D’s RCA cable to use as an audio signal input.

Specifications

General

Operating voltage12V DC car battery
Current consumption26A
Operational temperature range–10°C – 60°C
Waterproof & DustproofIP66, IP67
Max Power Output600W
Speaker Impedance4Ω (2Ω to 8Ω allowable) (Bridged connection: 4Ω to 8Ω allowable)
Frequency response (+0, –3dB)10Hz–35kHz
Input Sensitivity (RCA)0.2V-5.0V
Signal to noise ratio89dB
Low pass filter frequency (–12dB/oct.)50Hz–200Hz (variable)
High pass filter frequency (–12dB/oct.)50Hz–200Hz (variable)

Rated Power Output

Stereo (4Ω)50W x 4 (20Hz–20kHz, ≤1.0% THD)
Stereo (2Ω)75W x 4 (1kHz, ≤1.0% THD)
Bridged (4Ω)150W x 2 (1kHz, ≤1.0% THD)

Misc. Specs

ColorBlack
Depth (in.)4.13
Width (in.)7.81
Height (in.)1.94
Amplifier Output (Watts)600
Amplifier Channels4
Color Finish NameBlack
Water ResistantYes
Product Weight (lbs.)3.5
WarningProposition 65 Warning for California Residents